Manual fire alarm activation is typically achieved through the use of a pullstation A fire alarmpullstation is an active fire protection device, usually wall ManualPullStations. A full line of manualpullstations for use with Mircom's conventional fire detection systems. Select a device from the list below. The BG-8 ManualPullStation from Fire-Lite Alarms is a metal pullstation that provides a single-action; normally-open contact alarm initiating point for use with UL listed Fire Alarm Control Panels. Simplex Grinnell offers reliable manualpull stations for safety and Fire Detection & Alarm Systems ManualPull Stations. 4 of 4 . PullStation Break Glass INO A manualpullstation featuring an aluminum die cast body, a key reset coded series of manual fire alarmpullstations. They offer a variety Our metal ManualPullStations are ADA compliant and available in a variety of colors and labeling, weatherproof and explosion proof models rated for hazardous atmosphere classifications and Marine. Manual Pull Station Alarm made of high quality die cast metal unit designed for quick, reliable response in emergency situations Wheelock Series MPS non-coded ManualPull Stations are constructed of high quality, die-cast metal for long lasting performance and may be mounted on a single gang backbox. Description The BG-12 Series PullStations are non-coded manualpullstations which provide a Fire Alarm Control Panel (FACP) with a single alarm initiating input signal. Buy Honeywell FireLite BG-12S Single Action ManualPullStation: Security & Surveillance - Amazon.com FREE DELIVERY possible on eligible purchases Why do Fire AlarmPullStations Break? By Douglas Krantz Ever wonder why a manualpullstation tends to break when someone attempts to push it back after setting off the alarms? NOTIFIER’s manual addressable pull can display the exact location of the activated manualstation and ensure a quick & effective response. Find out more. One of the first pullstations to be devised was the pull rod fire alarm. To ring the manual trip bells to signal for a fire or drill, one had to literally keep pulling the rod, hence the term pullstation. Find great deals on eBay for Fire AlarmPullStation in Industrial Fire Alarms. Shop with confidence. Installers Guide. Section Navigation. Location – Manual fire alarm boxes (pullstations) shall be located not more than five feet from the entrance to each exit. Compliance Requires Proper Placement. Manualpull mounting height. height is measured from the floor to the “operable part of each manual fire alarm box.” Anixter is your source for Pull Stations products. Addressable ManualPullStation, Fire Alarm Control Panel PullStation, Find great deals on eBay for pullstation fire alarm. Shop with confidence. ManualPullStation Cover Most surface mount manualpullstations are easily • A silencer key is provided with the Alarm Module to service the station The manualpullstation is activated by pulling forward on the readily identified bulls-eye alarm lever labeled, “PULL The Model 310 Manual Fire AlarmPullStation is a self contained addressable dual action lexan fire pullstation with a built in transmitter. It is UL Listed 38 and complies with ADA requirements of maximum pull force. The NOTIFIER NBG-12 Series is a cost-effective, feature packed series of non-coded manual fire alarmpullstations. It was designed to meet multiple applications with the installer and end-user in mind. Explosion-proof manualalarmpullstation. Rugged die-cast metal construction with durable “fire engine red” finish. Available in single or dual action pull. The MS- 400U Series manualstations are non-coded, single or double action devices which initiate an alarm when pulled. Resetting is accomplished by inserting a 1/8” screwdriver from the front. The Fire.Lite BG-12 Series is a cost-effective, feature-packed, non-coded series of manual fire alarmpullstations. It was designed to meet multiple applications with the installer and end-user in mind. Addressable ManualPullStations Compatible with Simplex fire alarm control panels equipped with either IDNet or MAPNET II communications. The Notifier NBG-12LX is a state-of-the-art, dual-action (i.e., requires two motions to activate the station) pullstation that includes an addressable interface for any Notifier intelligent control panel except FireWarden series panels, and the NSP-25 panel. This video shows you how to wire a fire alarm to a pullstation without using a control panel. I do not take responsibility for anything you do to your fire The PS-DA/PS-SA PullStations are non-coded manualpullstations which provide a Fire Alarm Control Panel (FACP) with a single alarm initiating input signal. ManualPullStation. For immediate manual actuation of a fire alarm or an extinguishing process. Direct alarm actuation by pulling down locking lever.